If you have a Crestron touch panel, there are a few things you can do to reset it. This article will cover how to reset the touch panel using the following steps:

  1. Open the door of your Crestron touch panel and remove any screws that hold it in place.
  2. Remove the battery cover by gently pushing it off with your fingers.
  3. Remove the two screws that hold the touchpanel in place on either side of the screen. Be careful not to damage the screen or components underneath.
  4. Place one screwdriver into each hole on top of the touchpanel and twist them clockwise until they come out completely (do not remove them from their posts).
  5. Replace both screws with new ones and reattach the battery cover, making sure it is tight against the touchpanel surface (it should now be impossible to move or remove it without damaging it).